Skip to main content
FREE Delivery!|(412) 449-9626

Monroe County, Pennsylvania ยท Free Delivery

Large River Rock and Bulk Aggregates for Blakeslee, PA

Free delivery to Blakeslee on every order, with loads arriving in as fast as 2 business days.

Delivering to Blakeslee, PA

Free delivery on every order.

  • Free delivery to Blakeslee
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Blakeslee

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Blakeslee

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Blakeslee

Decorative delivered to Blakeslee

Rounded stone for beds, borders and water features.

Sand delivered to Blakeslee

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Blakeslee

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Blakeslee

How delivery to Blakeslee works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Blakeslee.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Blakeslee addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Water is the problem here. Snowmelt and heavy rain run off slow-draining ground, scouring ditches, culvert outlets and gravel drives. Pennsylvania Rock Supply answers it with gravel and aggregate delivery in Blakeslee, PA. Start with 2A modified for a base that compacts hard. Then add clean stone where water has to move.

Materials for Blakeslee Projects

Order by size. Coarse stone armor the places water hits hardest. Finer stone handles bedding and finish work.

Coarse stone for slope, swale and bank protection

RipRap is the armor. R-4 suits ditches, and the larger R-5 to R-7 sizes hold banks and streambanks. Line a swale or a culvert outlet with RipRap and runoff slows before it cuts.

For construction entrances, subgrade stabilization and underdrains, use #4 Crushed Stone. It is large and clean, so it locks together without packing solid.

Railroad Ballast is the heavy coarse option for hard standing and severe drainage. Large River Rock builds dry creek beds that carry flow and hold a bank edge.

Clean stone that drains

2B is the washed 3/4 inch stone Pennsylvania yards sell for French drains, retaining wall backfill and wet drive bases. No fines, so water passes through. Order 2B Stone or the same size as #57 Stone.

Base, bedding and finish

2A modified, also called modified stone, is crushed stone with the fines left in. It compacts hard under driveways, parking pads, shed and patio bases. Use 2A Modified for drive and pad bases, then top with Driveway Gravel.

Screenings, also called stone dust, pack firm under pavers and flagstone. Natural Pea Gravel stays loose underfoot on walkways and play areas. Screenings and 3/8" Natural Pea Gravel cover both jobs.

Delivery to Blakeslee and the Surrounding Area

Blakeslee sits in Monroe County. Pennsylvania Rock Supply delivers bulk material across the area, including East Stroudsburg, Tobyhanna, Stroudsburg, Mount Pocono and Effort.

Order online when you are ready. Choose your quantity by the ton or the yard, and size the load with the calculator before checkout. Pick your delivery date at checkout. A dump truck then brings the load to your site.

Have the drop spot cleared and reachable. Mark anything the truck should not cross.

Ground and Conditions in Blakeslee

Plan around the season first. Snow and wet, soft ground can last well into spring here. Base work waits until the ground has thawed and drained, then runs into fall.

Base stone should not go down on frozen or muddy ground. It will not compact, and it will move later.

The ground makes this matter. Glacial deposits sit over shale, siltstone and sandstone, with stony till on the uplands. A dense, slow-draining layer often lies not far below the surface. Water perches above it from fall into late spring, so low spots, drives and footings stay wet. Wetlands are common.

That is why clean stone goes under and around wet areas, and why 2A modified needs a drained, thawed subgrade before it goes down. Long, cold winters bring repeated freeze-thaw cycles, and frost depth commonly runs 36 to 42 inches, set by each municipality. Soils that stay wet above the dense till layer are prone to frost heave under a thin base.

Runoff from snowmelt and heavy rain scours roadside ditches, culvert outlets and gravel drives, and cuts into stream banks. Coarse stone at those points absorbs the energy. RipRap on the bank, #4 Crushed Stone at the outlet, 2B in the drain.

Questions Blakeslee Buyers Ask

What stone should I use for drainage in Blakeslee?

Use clean stone. 2B, sold elsewhere as #57 Stone, is the standard for French drains, downspout runs and backfill behind retaining walls. It has no fines, so water moves through it. For ditch and bank work, RipRap in R-4 and larger armor the channel. For a drive base in a wet spot, 2A modified still works, but it needs a drained subgrade under it or it will hold water.

What should I have ready when the truck arrives?

A clear path and a clear drop spot. Mark anything the truck should not cross, including septic covers, sprinkler heads and overhead wires. Tell the driver where you want the pile, since the load is dumped from the bed. If the ground is soft from spring thaw or heavy rain, pick a firm spot or expect the truck to stay back from the wet area.

Order Bulk Stone for Blakeslee

Pennsylvania Rock Supply delivers bulk gravel, stone, sand and topsoil to Blakeslee and the rest of Monroe County. Pick your material, set the quantity by the ton or yard, and choose a delivery date at checkout. Have your drop spot ready and place the order.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Blakeslee, PA

What stone should I use for drainage in Blakeslee?

Use clean stone. 2B, sold elsewhere as #57 Stone, is the standard for French drains, downspout runs and backfill behind retaining walls. It has no fines, so water moves through it. For ditch and bank work, RipRap in R-4 and larger armor the channel. For a drive base in a wet spot, 2A modified still works, but it needs a drained subgrade under it or it will hold water.

What should I have ready when the truck arrives?

A clear path and a clear drop spot. Mark anything the truck should not cross, including septic covers, sprinkler heads and overhead wires. Tell the driver where you want the pile, since the load is dumped from the bed. If the ground is soft from spring thaw or heavy rain, pick a firm spot or expect the truck to stay back from the wet area.

What access does the truck need at my Blakeslee address?

A clear, level spot the truck can reach and tip in, with nothing parked in the way and no low branches or wires over the approach. If the drop is behind a gate, tell us the width when you order. Soft ground after rain is the usual reason a delivery in Blakeslee has to be moved, so point out anywhere the truck should not drive.